Loading
Case study · 2019

Supply of Fixed Telecom Network and Line Over-Voltage Protection Components in Syria

Network Infrastructure Solutions
Year
2019
Client type
Telecommunications Entity

01Summary

DIMAS supplied passive infrastructure components for copper-pair fixed telecommunications networks in Syria, including LSA back-mount frames in different capacities, 10-pair disconnection modules, identification label holders, over-voltage protection magazines, and spare gas discharge tube (GDT) arresters. These products support copper-pair termination organization, identification, and line-protection arrangements at telecom distribution points. DIMAS's role in this project was limited to supplying the recorded components and materials.

02Requirements

The supply requirements covered components suited to copper telephone-line distribution environments: LSA mounting frames with capacities of 5, 10, and 11 modules; 10-pair disconnection modules with identification accessories; 10-pair protection magazines fitted with GDT arresters; and separately supplied spare protection elements. Each model, capacity, and recorded quantity remained distinct, with nominal frame capacity distinguished from actual line usage.

03Technical fit

The supplied components have complementary functions in main distribution frame (MDF), copper telecom cabinet, and distribution-point environments. LSA back-mount frames provide mounting positions for disconnection modules. With 10-pair modules, a 5-way frame nominally accommodates up to 50 pairs, a 10-way frame up to 100 pairs, and an 11-way frame up to 110 pairs. LSA modules allow wire-pair termination and disconnection for maintenance and testing by the network operator, while label holders support connection identification.

The 10-pair protection magazines are designed to accommodate gas discharge tube (GDT) devices that mitigate line over-voltage effects when used under the appropriate technical conditions. Separately supplied GDT devices serve as spares for compatible magazines. The TP3E8-230HM specifies a nominal 230V rating and a rated 20kA impulse-current capability under the product's stated 8/20µs reference waveform. These are nominal component ratings and capacities, not installed-line counts or DIMAS field-test results.

04Documented scope

  • Supply of 14,400 TAEPO TP-1212-10-10 back-mount frames, each designed to accommodate up to ten 10-pair LSA modules.
  • Supply of 3,200 TAEPO TP-1212-10-5 back-mount frames, each designed to accommodate up to five 10-pair LSA modules.
  • Supply of 9,000 TAEPO TP-1212-10-11 back-mount frames, each designed to accommodate up to eleven 10-pair LSA modules.
  • Supply of 250,000 TP-1201-10 LSA disconnection modules, each designed for ten pairs, together with 9,000 TP-1213-10 identification label holders, retained as separate supply records.
  • Supply of 15,000 TAEPO TP-1502-10P3G over-voltage protection magazines designed for ten line pairs using gas discharge tube (GDT) arresters.
  • Supply of 1,500 spare TAEPO TP3E8-230HM three-electrode GDT arresters, with a nominal 230V rating, intended for compatible telecom line-protection magazines.

05Key components

Total items
7
DIMAS supply
7

Highlights

DIMAS supply· 7

  1. 01
    Model
    TP-1212-10-10
    Company
    TAEPO
    Quantity
    14,400 mounting frames
    Description
    Metal LSA back-mount frame accommodating ten 10-pair disconnection modules (nominal 100-pair capacity). Its specified features include a rigid metal profile and silver anti-corrosion finish for MDF and copper-line distribution boxes.
    Technical role:
    Providing a mounting and organizational base for LSA modules in copper-line distribution equipment.
  2. 02
    Model
    TP-1212-10-5
    Company
    TAEPO
    Quantity
    3,200 mounting frames
    Description
    Metal LSA back-mount frame accommodating five 10-pair modules (nominal 50-pair capacity), with the specified tool-free snap-on arrangement and silver anti-corrosion finish.
    Technical role:
    Supporting LSA-module mounting and organization in smaller-capacity telecom distribution points.
  3. 03
    Model
    TP-1212-10-11
    Company
    TAEPO
    Quantity
    9,000 mounting frames
    Description
    Metal LSA back-mount frame accommodating eleven 10-pair modules (nominal 110-pair capacity), with tool-free snap-on mounting and the specified silver anti-corrosion finish.
    Technical role:
    Providing organized mounting positions for a larger number of LSA modules in copper telecom distribution assemblies.
  4. 04
    Model
    TP-1201-10
    Company
    TAEPO
    Quantity
    250,000 lsa modules
    Description
    Ten-pair LSA disconnection module using insulation displacement connection (IDC) termination and normally closed two-part contacts, allowing line-pair disconnection and access for operator maintenance and testing. The specified grey-base, white-body unit is intended for MDF, cross-connect cabinets and distribution points.
    Technical role:
    Providing a component for terminating, disconnecting and organizing ten copper pairs per module. The quantity of 250,000 counts supplied modules, not line pairs.
  5. 05
    Model
    TP-1213-10
    Company
    TAEPO
    Quantity
    9,000 label holders
    Description
    Identification label holder for 10-pair LSA modules, made from the specified impact-resistant thermoplastic with a label window or slot for pair and connection identification and tool-free snap-on attachment to compatible LSA frames.
    Technical role:
    Supporting pair identification and connection tracing as an accessory separate from the disconnection module.
  6. 06
    Model
    TP-1502-10P3G
    Company
    TAEPO
    Quantity
    15,000 protection magazines
    Description
    Ten-pair over-voltage protection magazine for LSA-based copper telecom lines. It incorporates three-electrode gas discharge tube (GDT) arresters in the specified protective arrangement and has the recorded grey housing.
    Technical role:
    Providing a component designed to mitigate line over-voltage and transient surge effects when used in a compatible protection arrangement.
  7. 07
    Model
    TP3E8-230HM
    Company
    TAEPO
    Quantity
    1,500 protection elements
    Description
    Spare three-electrode gas discharge tube (GDT) arrester with a nominal 230V rating and specified dimensions of Φ8 × 10 mm. Product specifications state a rated 20kA impulse-current capability under an 8/20µs waveform, without a failsafe mechanism, and with low capacitance and insertion loss.
    Technical role:
    Providing a spare protection element for compatible telecom magazines. The 20kA figure is a product rating under reference conditions, not a DIMAS test result.
06·Delivery record

The project materials were recorded as delivered in Syria on September 27, 2019. The contractual period was 120 days and the actual recorded period was 92 days. The supply comprised seven distinct TAEPO product records, all within DIMAS's supply scope.

07 · Why DIMAS

DIMAS supplied a defined range of copper telecom distribution and line-protection components, preserving the distinctions between LSA frame models, disconnection modules, identification accessories, protection magazines, and spare GDT arresters. The material record identifies each product's function and quantity without conflating nominal capabilities with the supply scope.

Start a structured conversation about your requirement.

Share the business need, site context and preferred service area. DIMAS will use the information to understand the enquiry and determine an appropriate next step.